Tyco Thermal Controls

H908. Plug-In Cord Set with GFI. This WinterGard H908 plug-in power connection kit is for use in pipe-heating and roof & gutter de-icing applications. The H908 is a plug-in, ground-fault-protected power connection kit. This kit is for use with any of the following WinterGard heating cables: H311, H611, and H612 120-V heating cables. The kit includes materials for one power connection and end seal.

H612250. 250 ft. Reel 6-Watt Per Foot WinterGard Wet Heating Cable 120V. 250 foot reel of 6-Watt per foot 120V WinterGard Wet Heating Cable for pipe freeze protection applications on metal or plastic pipes up to 8 inches in diameter, in wet or dry locations only. Also for use in roof/gutter de-icing applications. This product MUST be used with one of two available Power Connection Kits. The H900 (Global #B49344) Hardwire Power Connection (includes end seal) is used for hardwiring directly into...

H903. Application Tape and Labels (66 ft roll). The H903 includes one roll of application tape and ten electric traced labels. The application tape is a 66-ft (20-m) roll that is used to attach heating cables to pipes. The electric traced labels attach to the outside of the pipe thermal insulation weather barrier to indicate the presence of electric heat tracing. Use one label for every 10 feet (3 m) of pipe, alternating on either side of the pipe. Made in the USA.

H612050. 50 Ft. box 6-Watt WinterGard Wet Heating Cable 120V. 50 feet of 6-Watt per foot 120V WinterGard Wet Heating Cable for pipe freeze protection applications on metal or plastic pipes up to 8 inches in diameter, in wet or dry locations only. Also for use in roof/gutter de-icing applications. This product MUST be used with one of two available Power Connection Kits. The H900 (Global #B49344) Hardwire Power Connection (includes end seal) is used for hardwiring directly into a junction box...

W51-24P. 120V 24 ft. preassembled Heating Cable24 ft. preassembled waterproof heating cable with 30 inch cold lead for pipe freeze protection or roof/gutter de-icing applications. NOTE: The National Electrical Code requires the use of ground-fault protection of equipment to reduce the risk of fire caused by damage or improper installation. All installations must also comply with applicable local codes and standards.

H912. Gel Filled End Seal Kit (2 each). The WinterGard H912 is a gel-filled end seal kit available for use with all WinterGard heating cables. Each kit includes two end seals. Note: End seals are already included in the H900, H908, and H910 Kits. Made in the USA.

AMC-F5. Fixed Point Thermostat (40F). The AMC-F5 thermostat is designed to control heat-tracing systems used for freeze protection in non hazardous locations. The thermostat has a fixed set point of 40°F (4.4°C) and can be used in ambient-sensing mode (with sensor in air) or line-sensing mode (with sensor placed on pipe or tank wall). It can be used to control a single heat tracing circuit or as a pilot control of a contactor switching multiple heat-tracing circuits. Made in the USA. ...

H910. Splice and Tee Kit (Waterproof). The WinterGard H910 is a Splice and Tee kit available for use with all WinterGard heating cables. Each kit provides materials for one splice or one tee and one end seal. Made in the USA.

W51-18P. 120V 18 ft. preassembled Heating Cable18 ft. preassembled waterproof heating cable with 30 inch cold lead for pipe freeze protection or roof/gutter de-icing applications. NOTE: The National Electrical Code requires the use of ground-fault protection of equipment to reduce the risk of fire caused by damage or improper installation. All installations must also comply with applicable local codes and standards.

H913. Roof Clips (10 each). The H913 roof clips are used to secure WinterGard Wet and Gardian heating cables to to shingle and metal seam roofs and gutters. The H913 is a bag of 10 clips. Made in the USA.

H914. Roof Clips (50 each). The H913 roof clips are used to secure WinterGard Wet and Gardian heating cables to to shingle and metal seam roofs and gutters. The H914 is a box of 50 clips. Made in the USA.

W51-12P. 120V 12 ft. preassembled Heating Cable12 ft. preassembled waterproof heating cable with 30 inch cold lead for pipe freeze protection or roof/gutter de-icing applications. NOTE: The National Electrical Code requires the use of ground-fault protection of equipment to reduce the risk of fire caused by damage or improper installation. All installations must also comply with applicable local codes and standards.

H900. Hardwire Power Connection Kit. This WinterGard H900 power connection kit is for use in pipe-heating and roof & gutter de-icing applications. This kit is for use with any of the following WinterGard heating cables: H311, H611, H612, H621, and H622. Materials for one power connection and one end seal are included. Do not use this kit with aluminum feed wires.