BRENNAN EQUIPMENT - LITTLE GIANT

WT-3060-LL. Little Giant® Maple Top Table, Adjustable Leg, 30 x 60These 1-3/4" thick butcher block tops have a two-coat catalyzed varnish finish, and are attached to an all-welded, angle steel frame for unmatched rigidity and strength. The impact resistant, hardwood tops are non-conductive, resist damage from heavy blows, and provide an extremely durable, yet "forgiving" work surface. All models are fully assembled and ready for immediate use. Leg Levelers adjust from 32" to 35" high. ...

Little Giant® Mobile Table, 2 Shelf, 30 x 72, Wheel BrakesAll welded steel construction means years of rugged service and no assembly. Single shelf model with open style cross-arm base serves as a workbench where seating is required. Two shelf models provides for additional storage or transport capacity. All models are 34" high and feature 4 swivel casters for increased mobility, and 5" non-marking polyurethane wheels with ball bearings. Wheel brakes are standard on single shelf models,...

ASR-3048. Little Giant® Adjustable Sheet & Panel Rack, 30 x 48For stationary storage of panels and sheet material. Smooth 12 gauge steel deck has 4" underclearance. Supplied with 3 upright dividers that extend 27" above the deck. Legs have foot pads with anchor holes.

MTH1-3060-AH. Little Giant MTH1-3060-AH Heavy Duty Machine Table- Adjustable HeightAdjustable height heavy duty machine table. 7 gauge steel top with heavy 2" x 2" leg construction for demanding applications. Height adjustable from30" to 37" in 1" increments. Gray powder coat finish

GL-2448-10SR. Little Giant® Merchandise Collector Tray Type Shelves 24 x 48 Rubber WheelsShelves are heavy 12 gauge steel with structural angle sub-frame and shelf reinforcements. Shelves are available with 1-1/2" lip, or with flush edges. Raised offset handle includes cross brace hand guard for added safety. These welded units are shipped set up and ready for immediate use, with 2 swivel and 2 rigid casters. Shelf clearance 19".

CH-2448-16PFSD. Little Giant® Wagon Truck - Flush Deck - 24x48 - Pneumatic Wheels - 3000 Lb. Cap.Fifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when...

Little Giant® Heavy Duty Steel Mobile Storage Bins, 12 Openings, 32"W x 20"D x 45-1/2"HWELDED STEEL Mobile Storage Bins: HEAVY DUTY - All welded 12 gauge steel construction with powder coated finish for rugged durability. OPEN HOPPER FRONT - Each level has overall dimensions of 12-1/2"H x 15"D x 32"W. WELDED DIVIDERS - Available with up to 4 permanent storage compartments per level HEAVY 6" X 2" CASTERS - 4-swivel casters with hard tread phenolic wheels for ease of movement. Mobile units...

Little Giant® All Welded Storage Locker, 24 x 60Secure, visible storage for larger, bulkier items. 13g expanded metal has small 3/4" x 1-1/2" diamond-shaped openings. Doors swing open a full 270 degrees, back to the sides and out of the way. 4" underclearance for transporting with pallet truck or fork lift. 72" interior height, 78" overall height. Welded unit ships set up and ready for immediate use.

ASR-3060. Little Giant® Adjustable Sheet & Panel Rack, 30 x 60For stationary storage of panels and sheet material. Smooth 12 gauge steel deck has 4" underclearance. Supplied with 3 upright dividers that extend 27" above the deck. Legs have foot pads with anchor holes.

NP-2448-G. Little Giant® Raised Height Nursery Platform Wagon - 24 x 48All-welded construction is lightweight and durable. 16" deck height for easier loading & unloading. Smooth, industrial strength 14 gauge perforated steel deck allows moisture & debris to pass through, cleans up easily, and have a 1-1/2"retaining lip. Cushion load Pneumatic tires with 12" load wheels, 10" front swivel casters. U-handle for maneuverability. Ships fully assembled with durable green powder coat finish. ...

Little Giant® Adjustable Welded Workbench w/Open Base, 36 x 72Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double-reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all-welded units ship fully assembled and ready for immediate use.

WW3672-HD-ADJ. Little Giant® Heavy Duty 7 Gauge Steel Workbench, Drawer, Adj., 36 x 72Heavy-Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to 10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"-thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"-diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lb. capacity for added storage. Adjustable 28" to 38"...

T-220-10FF. Little Giant® Reinforced Nose Hand Truck - Dual Handle - 10" Flat Free WheelsHeavy 1.05" 14 ga. tubular steel for added strength to frame and stair glides. 4 curved ribs with vertical center strap. 12" Deep x 14" Wide reinforced nose plate - safely handles larger, bulky loads; 10 year guaranteed noseplate. Extra-high 29" stair glides provide rigidity and longer frame life. Zinc plated "c" axle is interchangeable in tri-hole axle bracket

WT-3048-LL. Little Giant WT-3048-LL Butcher Block Top Table, Open BaseButcher block tables come with 1-3/4" thick butcher block tops finished with a two coat catalyzed varnish finish. Tops are attached to an all welded, angle steel frame for rigidity and strength. The impact resistant, hard wood tops are non conductive, resist damage from heavy blows, and provide a durable work surface. All models are fully assembled.

3G-3060-6PHBK. Little Giant® HD Welded Shelf Truck, 3 Flush Shelves, 30 x 6012 gauge shelves handle the heaviest of loads. Shelves available with flush edges, or with 1-1/2" retaining lip. 2 swivel and 2 rigid casters with 6"x 2" hard tread phenolic wheels for added maneuverability under heavy loads. Swivel casters have wheel brakes to stop unwanted movement when loading and unloading. 36" overall height.

4SH-3060-72. Little Giant® Welded Steel Shelving, 4 Shelves, 30 x 60Reinforced 12 gauge steel shelves with 2000 lb. capacity per shelf. 2" x 2" x 3/16" corner angles have footpads with anchor. 72" overall height with 3-1/2" bottom shelf underclearance. Ships set up and ready for immediate use.

3LG-1832-BRK. Little Giant® All Welded Service Cart, 3 Flush Shelves, 18 x 32Little Giant durability in an economical shelf truck. These all welded units ship fully assembled. Features include heavy 12 gauge shelves and non-marking 5" polyurethane casters with ball bearing wheels. Bottom shelf has retaining lip for small parts. Top shelf is 35" above ground, and is available with lip up or down (flush top). Overall height 35".

SSB-RAMP. Little Giant® Spill Platform Ramp for Low Profile ModelsHeavy-gauge steel construction holds up in applications where plastic units just won't do, either for durability reasons, or when materials being stored are not compatible with plastic. Optional Ramps available in 2 heights. Low platform height offers easy access to stored materials, easier loading and unloading of drums.

PD-4848-6PH. Little Giant® Pallet Dolly - 48 x 48Convenient, easy rolling, maneuverability for any pallet. Four swivel casters with non-marking 6" x 2" phenolic wheels and 3600-lbs capacity. Welded steel construction ships set up and ready for immediate use. Double Floor Lock option prevents unwanted movement.

CH-2448-16P. Little Giant® Wagon Truck - Lip Deck - 24x48 - Pneumatic Wheels - 3000 Lb. CapacityFifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when...

CA-3048-8PPY. Little Giant® 3-Sided Bulk Truck Mesh Sides 30x48 8 x 2 Polyurethane WheelsIdeal for transporting or staging of bulkier materials. All models have a 12gauge reinforced deck, and 2 swivel, 2 rigid casters with a pushbar handle on swivel caster end. All welded units have a Powder Coated finish and ship fully assembled. Mesh sides: 13 gauge flattened expanded metal with 1-1/2" angle iron corners and top trim. Available in two heights,

Little Giant® Maple Top Table, Adjustable Leg, 24 x 24These 1-3/4" thick butcher block tops have a two-coat catalyzed varnish finish, and are attached to an all-welded, angle steel frame for unmatched rigidity and strength. The impact resistant, hardwood tops are non-conductive, resist damage from heavy blows, and provide an extremely durable, yet "forgiving" work surface. All models are fully assembled and ready for immediate use. Leg Levelers adjust from 32" to 35" high. ...

NBP-3048-8PUBK. Little Giant® Pipe Stake Truck, 30 x 48, Polyurethane WheelsIdeal for transporting roll goods and other long bulky loads. Removable 1-5/16" diameter. Pipe Stakes extend 30" above the deck. Formed 12 gauge steel deck is reinforced for extra strength. Casters are 8" diameter, 2 rigid and 2 swivel with brakes to help prevent unwanted movement when loading or unloading long material. Deck height 11", overall height 41".

IP-2448RM-BRK. Little Giant® Mobile Table, 1 Shelf, 24 x 48All welded steel construction means years of rugged service and no assembly. Single shelf model with open style cross-arm base serves as a workbench where seating is required. Two shelf models provides for additional storage or transport capacity. All models are 34" high and feature 4 swivel casters for increased mobility, and 5" non-marking polyurethane wheels with ball bearings. Wheel brakes are standard on single shelf models,...