Fernco

P1070-44 Fernco Corrugated to PVC ConnectorProvides a quick connection between 4" corrugated pipe and 4" PVC DWV pipe. Constructed of flexible, durable PVC. No. P1070-44: Size: 4", Material: PVC, Type: Corrugated

P1001-66 Fernco Flexible Coupling - Clay-to-ClayClay pipe to clay pipe flexible coupling with 2 stainless steel clamps. No. P1001-44: Type: Clay to Clay, Size: 4", Dimensions: 5.29" (A) X 5.29" (B) X 4.10" (C), Material: Elastomeric PVC No. P1001-66: Type: Clay to Clay, Size: 6", Dimensions: 7.50" (A) X 7.50" (B) X 6.00" (C), Material: Elastomeric PVC

P1002-44 Fernco Reducing Flexible CouplingMade of a tough elastomeric PVC compound that meets the requirements of ASTM No. D5926, are resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases. Stainless steel clamps are corrosion-resistant and rust-proof. For use in sewer and drain, water, and vent piping. Maximum working pressure 4.3 P.S.I. (29.6 kPa); Maximum operating temperature: 140 deg. F. nonconsistent. A = the inside diameter (I.D.) of side No. 1. B = the inside...

P1002-66 Fernco Reducing Flexible CouplingMade of a tough elastomeric PVC compound that meets the requirements of ASTM No. D5926, are resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases. Stainless steel clamps are corrosion-resistant and rust-proof. For use in sewer and drain, water, and vent piping. Maximum working pressure 4.3 P.S.I. (29.6 kPa); Maximum operating temperature: 140 deg. F. nonconsistent. A = the inside diameter (I.D.) of side No. 1. B = the inside...

PBR-64 O-RingFor most 4" house to 6" sewer connectors. Meets ASTM C443, C425, and other official specifications. No. PBR-64: Size: 4" x 6", Material: Rubber, Type: House to Sewer

P1056-42 Fernco Reducing Flexible CouplingMade of a tough elastomeric PVC compound that meets the requirements of ASTM No. D5926, are resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases. Stainless steel clamps are corrosion-resistant and rust-proof. For use in sewer and drain, water, and vent piping. Maximum working pressure 4.3 P.S.I. (29.6 kPa); Maximum operating temperature: 140 deg. F. nonconsistent. A = the inside diameter (I.D.) of side No. 1. B = the inside...

P1056-44 Fernco Flexible CouplingDurable, flexible PVC. A = the I.D. (inside diameter) of side No. 1. B = the I.D. of side No. 2. C = the length of the actual coupling, end-to-end. No. P1056-125: Type: Plastic to Plastic, Size: 1-1/4" Pipe Size, Dimensions: 1.70" (A) x 1.70" (B) x 3.40" (C), Material: Elastomeric PVC No. P1056-150: Type: Plastic to Plastic, Size: 1-1/2" Pipe Size, Dimensions: 1.95" (A) x 1.95" (B) x 3.40" (C), Material: Elastomeric PVC No. P1056-22: Type: Plastic to Plastic,...

P1056-66 Fernco Flexible CouplingDurable, flexible PVC. A = the I.D. (inside diameter) of side No. 1. B = the I.D. of side No. 2. C = the length of the actual coupling, end-to-end. No. P1056-125: Type: Plastic to Plastic, Size: 1-1/4" Pipe Size, Dimensions: 1.70" (A) x 1.70" (B) x 3.40" (C), Material: Elastomeric PVC No. P1056-150: Type: Plastic to Plastic, Size: 1-1/2" Pipe Size, Dimensions: 1.95" (A) x 1.95" (B) x 3.40" (C), Material: Elastomeric PVC No. P1056-22: Type: Plastic to Plastic,...

P44U-305 Fernco PVC Iron Pipe Hub AdapterCast-iron (soil pipe) hub adapters. The cast-iron hub adapter series will connect plastic DWV Schedule 40 or Schedule 30 piping directly into the hub of cast-iron (soil) pipe without packing, chemical mixtures, or other materials. The resultant joint is water and gas tight. The fittings listed are for service weight cast-iron hubs only. No. P44U-405: Schedule: DWV Sch40 or Sch30 to Cast Iron, Size: 4" x 4", Material: PVC, Type: Donut Hub No. P44U-305:...

P1056-64 Fernco Reducing Flexible CouplingMade of a tough elastomeric PVC compound that meets the requirements of ASTM No. D5926, are resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases. Stainless steel clamps are corrosion-resistant and rust-proof. For use in sewer and drain, water, and vent piping. Maximum working pressure 4.3 P.S.I. (29.6 kPa); Maximum operating temperature: 140 deg. F. nonconsistent. A = the inside diameter (I.D.) of side No. 1. B = the inside...

P33U-305 Fernco PVC Iron Pipe Hub AdapterCast-iron (soil pipe) hub adapters. The cast-iron hub adapter series will connect plastic DWV Schedule 40 or Schedule 30 piping directly into the hub of cast-iron (soil) pipe without packing, chemical mixtures, or other materials. The resultant joint is water and gas tight. The fittings listed are for service weight cast-iron hubs only. No. P44U-405: Schedule: DWV Sch40 or Sch30 to Cast Iron, Size: 4" x 4", Material: PVC, Type: Donut Hub No. P44U-305:...

PQC-103 Fernco Flexible Pipe CapMade of strong flexible PVC for a tight fit. Reusable, easy-to-install. Best method for sealing test pipes, pipe ends, and cleanouts. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint. No. PQC-101: Type: Slip, Schedule: N/A, Size: 1-1/2", Material:...

FPW24CS Fernco Pow-R Wrap Pipe Repair Wrap2" x 48" Pow-R Wrap repair wrap for up to 1" diameter pipes. Pow-R-Wrap sets like steel. It is a strong permanent and economical pipe repair. Works on virtually every kind of pipe. An easy alternative to traditional methods such as cementing, soldering, welding, sleeving, and replacement. Works on wet, dry, clean, dirty, or corroded pipes. Even works under water, salt or fresh. No. FPW24CS: Size: 2" x 48", Material: Fiberglass, Pkg Qty: 1, Package...

PQC-101 Fernco Flexible Pipe CapMade of strong flexible PVC for a tight fit. Reusable, easy-to-install. Best method for sealing test pipes, pipe ends, and cleanouts. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint. No. PQC-101: Type: Slip, Schedule: N/A, Size: 1-1/2", Material:...

P3001-215 Fernco Proflex Shielded CouplingShielded couplings are electromeric sleeves with stainless steel shields for use in joining cast-iron, Schedule 40 plastic, and steel to copper DWV pipe. No. P3001-150: Size: 1-1/2" x 1-1/2", Material: Elastomeric PVC, Pkg Qty: 1 No. P3001-215: Size: 2" x 1-1/2", Material: Elastomeric PVC, Pkg Qty: 1 No. P3001-22: Size: 2" x 2", Material: Elastomeric PVC, Pkg Qty: 1

PSF-100 Spanner FlangeRepairs broken closet flanges without replacing entire flange. Spanner flange is made from stamped steel and avoids time consuming and costly job of replacing closet flange. 1 per card. No. PSF-100: Material: Stamped Steel, Pkg Qty: 1, Package Type: Card

PQB-215 Fernco Flexible PVC BushingFor use with repair elbows and tees. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint. The model No. PCXPB215 will fit inside model No. PCXPB32 in event a 3" x 1-1/2" reduction is required. No. PQB-215: Type: Bushing, Size: 2" x 1-1/2",...

P1056-32 Fernco Reducing Flexible CouplingMade of a tough elastomeric PVC compound that meets the requirements of ASTM No. D5926, are resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases. Stainless steel clamps are corrosion-resistant and rust-proof. For use in sewer and drain, water, and vent piping. Maximum working pressure 4.3 P.S.I. (29.6 kPa); Maximum operating temperature: 140 deg. F. nonconsistent. A = the inside diameter (I.D.) of side No. 1. B = the inside...

PQT-300 Fernco Flexible PVC Repair TeeFor drain, waste, and vent use only. Do not use in pressure applications. Flexible neoprene rubber allows variety of take-off angles. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint. No. PQT-150: Size: 1-1/2", Material: Elastomeric PVC No....

PQT-400 Fernco Flexible PVC Repair TeeFor drain, waste, and vent use only. Do not use in pressure applications. Flexible neoprene rubber allows variety of take-off angles. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint. No. PQT-150: Size: 1-1/2", Material: Elastomeric PVC No....

PQC-104 Fernco Flexible Pipe CapMade of strong flexible PVC for a tight fit. Reusable, easy-to-install. Best method for sealing test pipes, pipe ends, and cleanouts. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint. No. PQC-101: Type: Slip, Schedule: N/A, Size: 1-1/2", Material:...

PDTC-215 Fernco Flexible Drain And Trap ConnectorFlexible PVC for new installations, repairs or adapting to drain pipes where lead pipe or damaged threads eliminate using standard fittings. No special tools required. Rustproof clamps. 1 per self-selling display package. No. PDTC-150: Size: 1-1/2" or 1-1/4" to 1-1/2" or 1-1/4", Material: PVC, Type: Flexible, Pkg Qty: 1 No. PDTC-215: Size: 1-1/2" or 1-1/4" to 2", Material: PVC, Type: Flexible, Pkg Qty: 1 ...

P1002-64 Fernco Reducing Flexible CouplingMade of a tough elastomeric PVC compound that meets the requirements of ASTM No. D5926, are resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases. Stainless steel clamps are corrosion-resistant and rust-proof. For use in sewer and drain, water, and vent piping. Maximum working pressure 4.3 P.S.I. (29.6 kPa); Maximum operating temperature: 140 deg. F. nonconsistent. A = the inside diameter (I.D.) of side No. 1. B = the inside...

FUS-2 Wax-Free Urinal SealUrinal seal for 2" drain pipe is wax-free, lead-free, hassle-free, and worry-free. Easy installation and reusable on the same urinal during service calls. Engineered to seal to the inside diameter of the drain pipe. Strong, flexible adhesive creates a positive seal. Made of flexible PVC (Polyvinyl Chloride) and will move with the urinal. Will not absorb moisture and is impervious to odor causing mold, mildew, and sewer gases. Will last the life of the urinal. No....