Robert Larson

605-2260 Robert Larson Rosewood Try SquareMade from the best quality rosewood with tempered steel blades, this square has a brass face for protection against damage and wear. The blade is securely held by steel rivets with surrounding inlayed brass diamonds. No. 605-2260: Blade Length: 9 In., Measurement Type: N/A, Graduations: N/A, Blade Material: Steel, Handle Material: Wood, Pkg Qty: 1, Package Type: Bag

340-1775 Combo Slip StoneWith different edge configurations, this stone will sharpen just about any carving tool from gouges to V-grooves. 1 edge is shaped round and tapers from approximately 1/8" to 1/2". The other edge is straight and has an angled taper. Stones measure approximately 2" x 4". No. 340-1775: Width: 2", Length: 4", Depth: 1/8" to 1/2", Pkg Qty: 1, Package Type: Card

540-7500 Robert Larson Coping Saw BladeHigh-quality coping saw blades with pinned ends. Fits most coping saws - old or new. No. 540-7500: Blade Length: 6-1/2 In., Pkg Qty: 12, Package Type: Hang Tag

620-0560 Robert Larson (Rampin) Brad DriverThis magnetic brad driver starts, drives, and countersinks finishing nails, headless brads, and pins. Beechwood handle and brass barrel. Magnet holds the brad in the barrel while you position the tool. No. 620-0560: Handle Material: Beechwood, Pkg Qty: 1, Package Type: Bag

520-5510 3-Piece Scraper Set3-piece set of scrapers are made from the finest German steel. Rectangle, curved on opposite ends, and the classic goose-neck shape included in the set. Blades are 0.8mm in thickness. Use a burnisher to sharpen. No. 520-5510: Pieces In Set: 3 pcs, Pkg Qty: 3, Package Type: Bag

705-2010 Water StoneA superior quality water stone, made to the finest Japanese specifications. These stones cut very fast, but still leave the finest edge. Stones need to be soaked for 30 minutes before using, but can remain in the water indefinitely after the first use. Start sharpening with a coarser stone such as an 800 grit item, then proceed progressively to finer grits. The 6000 grit finish stone will provide a perfect edge for almost any too and use. No. 705-0800: Grit: 800 Grit,...

520-6080 10" Reverse Dovetail SawHighest quality German steel blade with 15TPI mounted on a comfortable wooden handle. The 250mm blade is offset to the brass stiffening back so flush cuts can be made (as in cutting off dowel pins, through mortises, etc.). Reversible handle allow greater access. Two Cherries. No. 520-6080: Blade Length: 10", Teeth Per Inch: 15 TPI, Handle Type: Wood, Pkg Qty: 1, Package Type: Bag

515-3424 4-Piece Wood Carving SetSets of 4 tools made to the highest Two Cherries standard. Blades are forged from high-quality German steel. Includes multipurpose knife, straight chisel, shallow gouge, and a V tool. No. 515-3424: Pieces In Set: 4 pcs, Pkg Qty: 4, Package Type: Pouch

625-3000 Bevel GaugeAn indispensable quick check for grinding and honing. Has the 12 most common angles between 15 deg. and 120 deg.. Comes with hole for key chain so you can always have it with you. Solid brass. No. 625-3000: Material: Brass, Pkg Qty: 1, Package Type: Card

500-1520 Bevel Edge Wood ChiselThese chisels are made of the highest quality German steel. Carefully made, polished all-around. 1 of the finest tools made in the world. 10" to 14" in overall length with a traditional and well proportioned wooden handle. No. 500-1504: Blade Width: 4 mm, Overall Length: 10" to 14", Type: Bevel Edge, Pkg Qty: 1, Package Type: Hang Tag No. 500-1506: Blade Width: 5 mm, Overall Length: 10" to 14", Type: Bevel Edge, Pkg Qty: 1, Package Type: Hang Tag No. 500-1510:...

620-1200 Robert Larson Scratch AwlWith a round ball handle that perfectly fits in the hand, and a long 5" tapered blade, this awl is extraordinarily useful for a wide variety of marking purposes. Overall length of about 7-3/4". No. 620-1200: Overall Length: 7-3/4", Handle Material: Wood, Pkg Qty: 1, Package Type: Bag

895-1400 Robert Larson A4 Bench PlaneThe body of these planes are ribbed to ensure strength and rigidity. The machined faces of the frog bed firmly onto similar machined faces on the body of the plane and then fastened in position by 2 screws. This positive positioning helps prevent chattering. The cut iron is made of high carbon steel, hardened and tempered under scientific control for accuracy and uniformity. Handle and knob are hardwood. This tool is a traditional finishing or smooth plane....

340-1500 6" Hard And Soft Sharpening StoneBegin sharpening on the soft Arkansas side, and finish the edge on the hard Arkansas side. The stone measures 6" x 2" x 1/2" and comes in a cedar wood box. No. 340-1500: Width: 2", Length: 6", Depth: 1/2", Pkg Qty: 1, Package Type: Card

850-1015 Divider 150mmThis tool is of superb quality and will make measuring and layout work easier and more accurate. Nicely polished with brass fittings. In addition, this tool has a unique quick-nut adjustment that is easy and fast to use. No. 850-1015: Size: 150 mm, Pkg Qty: 1, Package Type: Bag

170-1012 Robert Larson Wood is Good Carpenter MalletA long-lasting tool that does not harm the chisel handle and is easy on the carvers hand and arm during extensive carving sessions. This is thanks to the synthetic striking surface that will absorb shock before it can get to your arm, and yet transmits the striking force to the tool. Wood handle is comfortable in your hand. No. 170-1012: Weight: 12 Oz., Handle Material: Wood, Pkg Qty: 1, Package Type: Hang Tag ...

825-3600 8-Piece Rasp SetAn economical set of riffler rasps for the beginner or occasional carver. Set of 8 riffler rasps. No. 825-3600: Pieces In Set: 8 pcs, Pkg Qty: 8, Package Type: Bag

500-1526 Bevel Edge Wood ChiselThese chisels are made of the highest quality German steel. Carefully made, polished all-around. 1 of the finest tools made in the world. 10" to 14" in overall length with a traditional and well proportioned wooden handle. No. 500-1504: Blade Width: 4 mm, Overall Length: 10" to 14", Type: Bevel Edge, Pkg Qty: 1, Package Type: Hang Tag No. 500-1506: Blade Width: 5 mm, Overall Length: 10" to 14", Type: Bevel Edge, Pkg Qty: 1, Package Type: Hang Tag No. 500-1510:...

500-1506 Bevel Edge Wood ChiselThese chisels are made of the highest quality German steel. Carefully made, polished all-around. 1 of the finest tools made in the world. 10" to 14" in overall length with a traditional and well proportioned wooden handle. No. 500-1504: Blade Width: 4 mm, Overall Length: 10" to 14", Type: Bevel Edge, Pkg Qty: 1, Package Type: Hang Tag No. 500-1506: Blade Width: 5 mm, Overall Length: 10" to 14", Type: Bevel Edge, Pkg Qty: 1, Package Type: Hang Tag No. 500-1510:...

620-1450. This shavehook, or molding scraper, is ideal for a variety of tasks, including touching-up molding shapes and restoration projects. The set comes with 3 replaceable scraping blades, specifically combination, triangular, and teardrop shapes. This tool is terrific for working in corners and tight spots. Beautifully made of tempered steel with a sturdy shank and a beech handle. Overall length of 9-1/2". No. 620-1450: Pieces In Set: 3 pcs, Pkg Qty: 1, Package Type: Bag

605-3150 Robert Larson T-BevelAdjustable to any angle, use this fine tool for marking or checking angles. The stock is made of rosewood with brass fittings, while the tempered steel blade is secured by a brass locking lever for easy thumb control. No. 605-3150: Size: 7-1/2 In., Handle Material: Wood, Blade Material: Steel, Pkg Qty: 1, Package Type: Bag

765-5000 6-Piece Wood Carving SetGreat beginner wood carving set. Contains 2 chisels, 2 gouges, a skew, and a V tool. If you want to do some occasional carving, or want to try out carving for the first time, this is a perfect choice. Overall length is about 6". No. 765-5000: Pieces In Set: 6 pcs, Pkg Qty: 6, Package Type: Card

825-5500 Radius PlaneThis is the easiest way to quickly radius the edge of your work. No need to set-up a router, simply reach for this radius plane and go to work. What makes this tool unique are the 2 carbide blades that make the cut. The leading blade takes off most of the material, while the second blade finishes the radius to a smooth finish. No. 825-5500: Width: 1", Length: 10", Pkg Qty: 1, Package Type: Bag

500-1564 Robert Larson 4-Piece Wood Chisel SetSet of 4 chisels (10mm, 16mm, 20mm, and 26mm) which are made of the highest quality German steel. Carefully made, polished all-aorund. 1 of the finest tools made in the world. 10" to 14" in overall length with a traditional and well proportioned wooden handle. No. 500-1564: Pieces In Set: 4 pcs, Pkg Qty: 4, Package Type: Pouch

720-1500 Robert Larson Ryoba Noko Pull SawThe Ryoba saw is a traditional Japanese carpenters saw. 1 side is used for rip cutting, the other for cross cutting, and the both cut on the pull stroke. Handle is fully bamboo wrapped and this saw has a replaceable blade as well. Teeth on the 240mm blade are hardened for extra long life. No. 720-1500: Type: Double Edge Pull Stroke Ryoba Saw, Blade Length: 9-1/2", Pkg Qty: 1, Package Type: Bag