Plews/Lubrimatic

17-355 Snap-On Chuck ClipFits all standard ball foot chucks with .672-32 thread. Holds chuck to tire valve while inflating. 1 per card. No. 17-355: Thread Size: 0.672", Threads Per Inch: 32 tpi

13-301 Tru-Flate Coupler & PlugFor compressed air lines, 300 psi (pounds per square inch) maximum rated working pressure. Includes one each 1/4" Female Coupler (13-335) and 1/4" Male NPT Plug (12-325). No. 13-301: Size: 1/4", Pkg Qty: 1, Package Type: Card

12-335 Tru-Flate 1/4 In. Body Series A-Style PlugTru-Flates ARO design coupler plug. Similar appearance compared to the industrial interchange. No. 12-325: Design: ARO, Thread Size: 1/4" MNPT, Material: Steel, For Use With: 13-300 Series Part Numbers No. 12-335: Design: ARO, Thread Size: 1/4" FNPT, Material: Steel, For Use With: 13-300 Series Part Numbers, Pkg Qty: 1, Package Type: Card

18-233 Tru-Flate Safety Blow GunLever-type. Conforms to all OSHA (Occupational Safety and Health Organization) requirements including noise level regulations. Features a vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Tamper proof pressure reducer limits nozzle pressure to 30 psi (pounds per square inch) or less with a maximum inlet pressure of 150 psi. Heavy-duty die-cast body with hang-up hook. 1/4" Female NPT (National Pipe Thread) ....

17-353 Tru-Flate Ball Foot Air Chuck w/ClipBall foot, direct air line chuck with clip. Built-in shut-off valve. No. 17-353: Port Size: 1/4" NPT, Pressure Rating: 150 psi, Type: Ball Foot, Pkg Qty: 1, Package Type: Card

18-241 Tru-Flate Deluxe Blow Gun KitComplete, all-purpose blow gun with four interchangeable nozzles for cleaning and inflating. Perfect for blowing sawdust and grass clippings, drying surfaces or inflating balls, rafts and air mattresses. Complete with Standard Nozzle, Rubber Tip Nozzle, Tapered Inflator Nozzle and Ball Inflator Needle. All nozzles packed for storage in a convenient see-thru plastic case. No. 18-241: Pressure Rating: 30 psi, Inlet Size: 1/4", Pkg Qty: 1, Package Type: Card ...

CP20 Tru-Flate 1/4 In. Body Series I/M-Industrial PlugIndustrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. No. CP21: Design: Industrial/Milton, Thread Size: 1/4" MNPT, Material: Steel, For Use With: 13-200 Series Part Numbers, Pkg Qty: 1 No. 12-225: Design: Industrial/Milton, Thread Size: 1/4" MNPT, Material: Steel, For Use...

21-505 Male CouplingThread size: 1/4" Male NPT x 1/4" Male NPT. Brass. 1 per card. No. 21-505: Design: Male, Thread Size: 1/4" MNPT, Material: Brass, Pressure Rating: 300 psi

13-605 Tru-Flate 3/8" Body Series CouplerAir line coupler features 100% air-tight seal, accidental disconnect protection, and tubular valve construction which promotes greater air flow. No. 13-527: Design: Industrial/Milton, Type: 3/8" Series Push-to-Connect, Thread Size: 3/8" MNPT, Material: Steel, Pressure Rating: 300 psi, For Use With: 12-500 Series Part Numbers, Pkg Qty: 1, Package Type: Card No. 13-537: Design: Industrial/Milton, Type: 3/8" Series Push-to-Connect, Thread Size: 3/8" FNPT,...

24-243 Tru-Flate Mini Filter/Pressure RegulatorGives accurate pressure regulation with maximum water and dirt separation. Increases life of expensive air-powered tools. Solid piston resists rupture, cracking, or tearing under pressure or high cycle rates. Maximum operating pressures: 150 P.S.I. at 125 deg. F. primary, 2 to 125 P.S.I. secondary. Operating temperature range: -10 deg. F. to +175 deg. F. Includes filter element and a pressure gauge. Port size: 1/4" NPTF. Manual drain. 5 micron...

13-135 Tru-Flate 1/4" Body Series CouplerAir line coupler features 100% air-tight seal, accidental disconnect protection, and tubular valve construction which promotes greater air flow. No. 13-334: Design: ARO, Type: 1/4" Series Push-to-Connect, Thread Size: 1/4" FNPT, Material: Brass, Pressure Rating: 300 psi, For Use With: 12-300 Series Part Numbers No. 13-335: Design: ARO, Type: 1/4" Series Push-to-Connect, Thread Size: 1/4" FNPT, Material: Brass, Pressure Rating: 300 psi, For Use With:...

12-935 Tru-Flate Hi Flo 1/4 In. Body Series PlugHi Flo plugs increase air flow to ensure your tools will provide maximum torque and optimal performance. Push-to-connect design is made of lightweight T6 aluminum. No. 12-925: Design: Tru-Flate, Thread Size: 1/4 In. MNPT, Material: Aluminum, Pressure Rating: 300 psi, Air Rating: 70 CFM, Pkg Qty: 2, Package Type: Card No. 12-935: Design: Tru-Flate, Thread Size: 1/4 In. FNPT, Material: Aluminum, Pressure Rating: 300 psi, Air Rating: 70 CFM, Pkg...

21-515 Female CouplingThread size: 1/4" Female NPT x 1/4" Female NPT. Brass. 1 per card. No. 21-515: Design: Female, Thread Size: 1/4" FNPT, Material: Brass, Pressure Rating: 300 psi

512-25E Amflo Rubber Air HoseIdeal for rugged applications where hoses may be dragged over concrete or other rough surfaces. The rubber construction offers very good cold weather flexibility and coils easily for storage. Ideal for garage, shop, industry, home and many other uses. Three year warranty. No. 512-25E: Inside Diameter: 1/4 In., Length: 25 Ft., Material: Rubber, Connection Type: 1/4 In. MNPT, Pressure Rating: 300 psi, Temperature Range: -20 to 165 F, Color: Red No. 512-50E: Inside...

25-24-RET Amflo Swivel End Air HoseThe handyman swivel end for use with all air tools, to relieve the whip action of the hose and to reduce stress on the operator's arm and wrist by providing easier maneuverbility. Solid smooth punch brass fitting. Female swivel. 1/4" x 2' (6.4mm x 0.61m) 1/4" (6.4mm) NPT. 300 P.S.I. Blue. No. 25-24-RET: Inside Diameter: 1/4 In., Length: 2 Ft., Material: Vinyl, Connection Type: 1/4 In. NPT, Pressure Rating: 300 psi, Color: Blue ...

13-611 Tru-Flate 3/8" Body Series CouplerAir line coupler features 100% air-tight seal, accidental disconnect protection, and tubular valve construction which promotes greater air flow. No. 13-527: Design: Industrial/Milton, Type: 3/8" Series Push-to-Connect, Thread Size: 3/8" MNPT, Material: Steel, Pressure Rating: 300 psi, For Use With: 12-500 Series Part Numbers, Pkg Qty: 1, Package Type: Card No. 13-537: Design: Industrial/Milton, Type: 3/8" Series Push-to-Connect, Thread Size: 3/8" FNPT,...

12-135 Tru-Flate 1/4 In. Body Series T-Style PlugTru-Flate design coupler plug. Short plug pilot, with wide metal section between the ball groove and the pilot. Thick sealing surface for longer seal life. No. 12-125: Design: Tru-Flate, Thread Size: 1/4" MNPT, Material: Steel, For Use With: 13-100 Series Part Numbers, Pkg Qty: 1, Package Type: Card No. CP1: Design: Tru-Flate, Thread Size: 1/4" MNPT, Material: Steel, For Use With: 13-100 Series Part Numbers, Pkg Qty: 1 No. 12-135: Design:...

24-803 Air Line Pressure GaugeAir line pressure gauge for service with compressors, filters-regulators, air lines, pneumatic tools and equipment. No. 24-801: Pressure Range: 0 to 200 psi, Connection Type: 1/8" MNPT, Mount Type: Back Mount, Pkg Qty: 1, Package Type: Box No. 24-803: Pressure Range: 0 to 160 psi, Connection Type: 1/4" MNPT, Mount Type: Back Mount

12-225 Tru-Flate 1/4 In. Body Series I/M-Industrial PlugIndustrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. No. CP21: Design: Industrial/Milton, Thread Size: 1/4" MNPT, Material: Steel, For Use With: 13-200 Series Part Numbers, Pkg Qty: 1 No. 12-225: Design: Industrial/Milton, Thread Size: 1/4" MNPT, Material: Steel, For Use...

502-HR-RET Amflo Manual Air Hose ReelNonretractable hose reel. Spring tension brake. All-steel construction. Solid brass 1/4" fittings. Comfortable swiveling handle. Can be mounted in any direction. Reel capacity is 100' for 3/8" hose or 50' of 1/2" O.D. air hose. Yellow and black. Hose not included. No. 502-HR-RET: Reel Capacity: 100 Ft., Fitting Size: 1/4 In.

12-50E Amflo Polyurethane Air HoseThe light weight of polyurethane hose makes it ideal for applications where dragging a heavy hose is an issue, like roofing. The smooth, non-marring finish also makes it ideal for indoor trim work where scratching surfaces could create damage. Maintains very good cold weather flexibility. Swivel end fittings reduce hose twist and bend restrictors reduce kinking and help increase the life of the hose. Four year warranty. No. 12-25E: Inside Diameter: 1/4 In.,...

18-203 Tru-Flate Standard Blow Gun, Lever TypeLever-type with hanger hook. Epoxy finish. 1/4" Female NPT inlet. To comply with OSHA standards, it must be used on a regulated air line with maximum pressure of 30 P.S.I. 1 per card. No. 18-203: Pressure Rating: 30 psi, Inlet Size: 1/4"

21-423 Tru-Flate Brass Hose SplicerSplicer has a Barb type hose and is precision machined to high quality standards. Constructed of brass to resist rust and corrosion. No. 21-423: Inside Diameter: 1/4" No. 21-467: Inside Diameter: 3/8"

21-555 Air Line Drain CockFor use in low pressure applications. Hand-tightening provides leak-proof seal. All brass, corrosion resistant material. No. 21-555: Connection Type: 1/8" NPT, Pkg Qty: 1, Package Type: Card No. 21-557: Connection Type: 1/4" NPT, Pkg Qty: 1, Package Type: Card