FLINT & WALLING, INC.

DW40E1622 Used on wells with 4" or larger diameter | Not needed with shallow well pumps Sold by EA

DW40E1726 Includes gasket and bolts | Deep or shallow use, will lift water from depths of up to 90' | Must be 4" minimum well casing for deep well application Sold by EA

DW40E1828 Used on wells with 4" or larger diameter | Not needed with shallow well pumps Sold by EA

EK05S High tensile bodies with larger water cavities for fast, easy priming | Separate priming ports enable quick water fill and the fast evacuation of air | Buna-N Quadraseal between pump case and motor bracket | Molded, snap-in diffusers are corrosion and abrasion resistant | Molded thermoplastic impellers | Pipe plugs and priming plugs coated with non-hardening, non-toxic, non-corrosive material | Standard shaft seal: ceramic and carbon face, self-adjusting, one size fits all | Permanently...

4F10G07305 One piece cast iron head with NEMA face mounting ring | 304 stainless steel pump shell threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance Sold by EA

4F10G05305 One piece cast iron head with NEMA face mounting ring | 304 stainless steel pump shell threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance Sold by EA

EK07S High tensile bodies with larger water cavities for fast, easy priming | Separate priming ports enable quick water fill and the fast evacuation of air | Buna-N Quadraseal between pump case and motor bracket | Molded, snap-in diffusers are corrosion and abrasion resistant | Molded thermoplastic impellers | Pipe plugs and priming plugs coated with non-hardening, non-toxic, non-corrosive material | Standard shaft seal: ceramic and carbon face, self-adjusting, one size fits all | Permanently...

CPJ05SB High tensile bodies with larger water cavities for fast, easy priming | Pressure regulator | Buna-N Quadraseal between pump case and motor bracket | Molded, snap-in diffusers are corrosion and abrasion resistant | Molded thermoplastic impellers | Pipe plugs and priming plugs coated with non-hardening, non-toxic, non-corrosive material | Standard shaft seal: ceramic and carbon face, self-adjusting, one size fits all | Permanently lubricated ball bearings ensure alignment of Dynamically...

4F05S05305 One piece stainless steel discharge head with NEMA face mounting ring | Stainless steel pump shell threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance Sold by EA

4F05S10305 One piece stainless steel discharge head with NEMA face mounting ring | Stainless steel pump shell threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance Sold by EA

4F07S05305 One piece stainless steel discharge head with NEMA face mounting ring | The 304 stainless steel pump shell is threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance...

4F07S07305 One piece stainless steel discharge head with NEMA face mounting ring | The 304 stainless steel pump shell is threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance...

4F10S05005 One piece stainless steel discharge head with NEMA face mounting ring | 304 stainless steel pump shell threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance Sold by EA

4F10S05305 One piece stainless steel discharge head with NEMA face mounting ring | The 304 stainless steel pump shell is threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance...

4F10S07305 One piece stainless steel discharge head with NEMA face mounting ring | The 304 stainless steel pump shell is threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance...

4F10S10305 One piece stainless steel discharge head with NEMA face mounting ring | The 304 stainless steel pump shell is threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance...

4F10S05301 One piece stainless steel discharge head with NEMA face mounting ring | Stainless steel pump shell threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance Sold by EA

CPH05S High tensile gray iron bodies | Separate priming ports | Buna-N Quadraseal between pump case and motor bracket | Molded, snap-in diffusers are corrosion and abrasion resistant | Pipe plugs and priming plugs coated with non-hardening, non-toxic, non-corrosive material | Standard shaft seal: ceramic and carbon face, self-adjusting, one size fits all | Permanently lubricated ball bearings ensure alignment of Dynamically Balanced Rotor Sold by EA

CPJ05B High tensile gray iron bodies | Separate priming ports | Buna-N Quadraseal between pump case and motor bracket | Molded, snap-in diffusers are corrosion and abrasion resistant | Molded thermoplastic impellers | Pipe plugs and priming plugs coated with non-hardening, non-toxic, non-corrosive material | Standard shaft seal: ceramic and carbon face, self-adjusting, one size fits all | Permanently lubricated ball bearings ensure alignment of Dynamically Balanced Rotor Sold by EA

EK10S High tensile gray iron bodies | Separate priming ports | Buna-N Quadraseal between pump case and motor bracket | Molded, snap-in diffusers are corrosion and abrasion resistant | Pipe plugs and priming plugs coated with non-hardening, non-toxic, non-corrosive material | Standard shaft seal: ceramic and carbon face, self-adjusting, one size fits all | Permanently lubricated ball bearings ensure alignment of Dynamically Balanced Rotor Sold by EA

4F07S10305 One piece stainless steel discharge head with NEMA face mounting ring | Stainless steel pump shell threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance Sold by EA

CPH05 High tensile gray iron bodies | Separate priming ports | Buna-N Quadraseal between pump case and motor bracket | Molded, snap-in diffusers are corrosion and abrasion resistant | Molded thermoplastic impellers | Pipe plugs and priming plugs coated with non-hardening, non-toxic, non-corrosive material | Standard shaft seal: ceramic and carbon face, self-adjusting, one size fits all | Permanently lubricated ball bearings ensure alignment of Dynamically Balanced Rotor Sold by EA

4F10S15305 One piece stainless steel discharge head with NEMA face mounting ring | Stainless steel pump shell threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance Sold by EA

4F05S07305 One piece stainless steel discharge head with NEMA face mounting ring | Stainless steel pump shell threaded on both ends for attachment to discharge head and mounting ring | Built-in check valve with elastomer ring for positive seal | Sleeve bearing with polypropylene sand slinger | Non-corrosive cable guard protect motor wires | Polypropylene "snap" on screen on cast iron units | Cartridge assemblies include all parts needed to refurbish pumps to like-new performance Sold by EA